Optimal Interfacial Engineering with Different Length of Alkylammonium Halide for Efficient and Stable Perovskite Solar Cells

Recently, two‐dimensional (2D) structure on three‐dimensional (3D) perovskites (graded 2D/3D) has been reported to be effective in significantly improving both efficiency and stability. However, the electrical properties of the 2D structure as a passivation layer on the 3D perovskite thin film and resistance to the penetration of moisture may vary depending on the length of the alkyl chain. In addition, the surface defects of the 2D itself on the 3D layer may also be affected by the correlation between the 2D structure and the hole conductive material. Therefore, systematic interfacial study with the alkyl chain length of long‐chained alkylammonium iodide forming a 2D structure is necessary. Herein, the 2D interfacial layers formed are compared with butylammonium iodide (BAI), octylammonium iodide (OAI), and dodecylammonium iodide (DAI) iodide on a 3D (FAPbI₃)_0.95(MAPbBr₃)_0.05 perovskite thin film in terms of the PCE and humidity stability. As the length of the alkyl chain increased from BA to OA to DA, the electron‐blocking ability and humidity resistance increase significantly, but the difference between OA and DA is not large. The PSC post‐treated with OAI has slightly higher PCE than those treated with BAI and DAI, achieving a certified stabilized efficiency of 22.9%.     

Creating Multiband and Broadband Metamaterial Absorber by Multiporous Square Layer Structure

Plasmonics - Since the metamaterial perfect absorber (MPA) is composed of electromagnetic resonance structures, the main operational mechanism of the MPA is electromagnetic resonance. In this work,...     

Degradation of chlorotoluenes and chlorobenzenes by the dual-species biofilm of Comamonas testosteroni strain KT5 and Bacillus subtilis strain DKT

The cooperation of Bacillus subtilis strain DKT and Comamonas testosteroni KT5 was investigated for biofilm development and toluenes and chlorobenzenes degradation. Bacillus subtilis strain DKT and C. testosteroni KT5 were co-cultured in liquid media with toluenes and chlorobenzenes to determine the degradation of these substrates and formation of dual-species biofilm used for the degradation process. Bacillus subtilis strain DKT utilized benzene, mono- and dichlorinated benzenes as carbon and energy sources. The catabolism of chlorobenzenes was via hydroxylation, in which chlorine atoms were replaced by hydroxyl groups to form catechol, followed by ring fission via the ortho-cleavage pathway. The investigation of the dual-species biofilm composed of B. subtilis DKT and C. testosteroni KT5 (a toluene and chlorotoluene-degrading isolate with low biofilm formation) showed that B. subtilis DKT synergistically promoted C. testosteroni KT5 to develop biofilm. The bacterial growth in dual-species biofilm overcame the inhibitory effects caused by monochlorobenzene and 2-chlorotoluene. Moreover, the dual-species biofilm showed effective degradability toward the mixture of these substrates. This study provides knowledge about the commensal relationships in a dual-culture biofilm for designing multispecies biofilms applied for the biodegradation of toxic organic substrates that cannot be metabolized by single-organism biofilms.

     

Slot‐Die and Roll‐to‐Roll Processed Single Junction Organic Photovoltaic Cells with the Highest Efficiency

The record efficiency of the state‐of‐the‐art polymer solar cells (PSCs) is rapidly increasing, due to the discovery of high‐performance photoactive donor and acceptor materials. However, strong questions remain as to whether such high‐efficiency PSCs can be produced by scalable processes. This paper reports a high power conversion efficiency (PCE) of 13.5% achieved with single‐junction ternary PSCs based on PTB7‐Th, PC₇₁BM, and COi8DFIC fabricated by slot‐die coating, which shows the highest PCE ever reported in PSCs fabricated by a scalable process. To understand the origin of the high performance of the slot‐die coated device, slot‐die coated photoactive films and devices are systematically investigated. These results indicate that the good performance of the slot‐die PSCs can be due to a favorable molecule‐structure and film‐morphology change by introducing 1,8‐diiodooctane and heat treatment, which can lead to improved charge transport with reduced carrier recombination. The optimized condition is then used for the fabrication of large‐area modules and also for roll‐to‐roll fabrication. The slot‐die coated module with 30 cm² active‐area and roll‐to‐roll produced flexible PSC has shown 8.6% and 9.6%, respectively. These efficiencies are the highest in each category and demonstrate the strong potential of the slot‐die coated ternary system for commercial applications.     

Preliminary report of knockdown resistance in Culex pipiens pallens and Aedes koreicus from Korea

Pyrethroid insecticides have been effective and powerful for controlling mosquitoes. However, abuse of these insecticides increases the number of resistant mosquitoes. In this study, Culex pipiens pallens and Aedes koreicus were collected from an artificial reservoir in the vicinity of a populated area in Korea, which is also a migratory bird catchment area. To monitor resistance to pyrethroid insecticides in mosquitoes, genomic DNA from the collected mosquitoes was sequenced for the kdr mutation in the voltage‐gated sodium channel (VGSC) gene. As a result, three samples with homozygous resistance (17.6%) and one with heterozygous resistance (5.9%) were found among 17 Cx. pipiens pallens specimens. One of the samples had a unique sequence at the amplified VGSC region. Of the 15 Ae. koreicus, no insecticide resistant individuals were found. In Korea, this is the first report of kdr genetic traits in Ae. koreicus and Cx. pipiens pallens and of a unique VGSC allele in Cx. pipiens pallens. Further investigation is needed to monitor the kdr resistance of these species in Korea and to determine how the unique sequence found in Cx. pipiens pallens is related to insecticide resistance.     

Improving phosphorus sustainability of sugarcane production in Brazil

Phosphorus (P) use in global food and bioenergy production needs to become more efficient and sustainable to reduce environmental impacts and conserve a finite and critical resource (Carpenter & Bennett, Environmental Research Letters, 2011, 6, 014009; Springmann et al., Nature, 2018, 562, 519). Sugarcane is one crop with a large P footprint because production is centered on P‐fixing soils with low P availability (Roy et al., Nature Plants, 2016, 2, 16043; Withers et al., Scientific Reports, 2018, 8, 2537). As global demand for processed sugar and bioethanol continues to increase, we advocate that improving P efficiency could become a key sustainability goal for the sugarcane industry. Here, we applied the 5R global P stewardship framework (Withers et al., Ambio, 2015, 44, 193) to identify more sustainable options to manage P in Brazilian sugarcane production. We show that current inputs of P fertilizer to the current crop area could be reduced by over 305 Gg, or 63%, over the next three decades by reducing unnecessary P fertilizer use, better utilization of recyclable bioresources and redesigning recommendation systems. Adoption of these 5R options would save the sugarcane industry in Brazil 528 US$ million and help safeguard global food and energy security.     

Baseline susceptibility of Asian corn borer (Ostrinia furnacalis (Guenée)) populations in Vietnam to Cry1Ab insecticidal protein

Susceptibility of Asian corn borer (ACB), Ostrinia furnacalis (Guenée) to Bacillus thuringiensis (Bt) Cry1Ab protein was studied between 2015 and 2016 with 11 ACB populations, collected from various geographical regions in Vietnam. A concentration range of Cry1Ab from 0.20 to 26.10 ng/cm² of diet was evaluated against F₁ ACB neonates using diet surface-overlay bioassays. Mortality data was recorded daily until seven days after infestation. Growth inhibition was recorded at the end of seven days. The median lethal concentration (LC₅₀) varied ≈3-fold among the different populations, ranging from 0.58 to 1.83 ng/cm² of diet with an overall mean of 0.86 ng/cm² of diet. Even the lowest concentration of 0.20 ng/cm² caused 73.53% growth inhibition. >90% growth inhibition was achieved at 0.82 ng/cm² or higher concentrations. The results reflect natural variation in Bt susceptibility among ACB populations rather than variation caused by prior exposure to selection pressures. LC₉₉ value (17.26 ng/cm²) was generated by pooling mortality data across different populations. The upper fiducial limit of LC₉₉ (24.38 ng/cm²) could be a potential diagnostic dose for future resistance monitoring programs. The findings from this study suggest that ACB populations in Vietnam are highly susceptible to Cry1Ab protein. This is the first report of Cry1Ab susceptibility of different ACB populations in Vietnam and will serve as a baseline for future resistance monitoring work.